PRODUCTSBy focusing on the magnetic material industry, we are dedicated to provide quality products and excellent services for our customers striving to be their first priority magnetic materials supplier.
Neodymium MagnetThe sintered NdFeB is the most advanced commercial permanent magnet and it's usually called "King of Magnetism" due to its excellent magnetic properties. Since it has many advantages such as high remanence, high coercivity, high magnetic energy product and so on, It has been extensively used in various fields.VISIT MORE
Hard Ferrite MagnetHard ferrite magnet is made by ceramic sintering process with the iron oxide and strontium carbonate as the main raw materials. Both isotropic and anisotropic hard ferrite magnets are available for Brisotech magnetics. There are mainly two production procedures, dry press and wet press. Due to its low cost, good temperature resistance and high stability, the hard ferrite (ceramic) magnet is widely used in multifarious fieldsVISIT MORE
SmCo MagnetSamarium Cobalt (SmCo) is rare earth permanent magnet featuring with the highest working temperature of 350c and no limitation of negative temperature. It also has very strong anticorrosion and antioxidant properties. Usually the surface treatment is not necessary. Therefore, it's widely used in high technology fields under harsh conditions such as heat-resistant motor, high precision sensor, detector and so on.VISIT MORE
AlNiCo MagnetAlNiCo (Aluminum Nickel Cobalt) magnet is an alloy consisting of Aluminum, Nickel, Cobalt, Copper, Iron and other trace metals. According to the different production processes, it's divided into cast AlNiCo and sintered AlNiCo. By the casting production process, various sizes and shapes can be achieved with slightly better magnetic performance than the sintered ones. The sintered AlNiCo is mostly used in small size products and the blank size tolerance is better than the cast ones. Besides, the sintered AlNiCo has better mechanical properties than the cast ones. In all of the permanent magnets, the cast AlNiCo has the lowest reversible temperature coefficient and its working temperature can be as high as above 600 centigrade degrees.VISIT MORE
Bonded Permanent MagnetBonded permanent magnet is fabricated by mixing magnetic powder and polymer or binder through hot pressing and injection molding. Bonded permanent magnet can be formed by adding shaft or other plugins during production. According to the different magnetic powder, it can be divided into bonded NdFeB and bonded ferrite.VISIT MORE
Flexible MagnetsFlexible magnet is made from synthetic rubber or plastic mixed with magnetic powder. This kind of magnetic material has excellent flexible characteristics and it's easy to fold and curl. Due to its high plasticity, it can be randomly cut, drilled and punched. The flexible magnet is divided into two types of isotropic and anisotropic. And the anisotropic flexible magnet usually has better magnetic performance than the isotropic ones.VISIT MORE
Magnetic AssembliesMagnetic assemblies are usually made by assembling magnetic materials with metals, nonmetals and other materials following certain requirements in order to optimize the magnetic circuit. Brisotech Magnetics has been dedicated to optimize the permanent magnet shapes and magnetic circuit to achieve the required magnetic properties at lowest cost. We can provide our customers tailored magnetic assemblies and offer them better product experience.VISIT MORE
